Body mass index and weight loss in patients submitted to orthognathic surgery: a prospective study.

OBJECTIVE: To compare the body mass index (BMI) and the weight loss (WL) in patients with dentofacial deformities who underwent monomaxillary versus bimaxillary orthognathic surgery. MATERIALS AND METHODS: This prospective longitudinal study included 69 patients with dentofacial deformities who underwent surgical orthodontic treatment. Patients were divided into two groups according to the type of orthognathic surgery: monomaxillary or bimaxillary. A preoperative nutritional assessment based on BMI was performed; the percentage of involuntary WL between the preoperative and postoperative periods was also calculated. Data were collected at preoperative and 10, 40, and 90 days postoperative (PO). Statistical analysis was performed using SPSS 17.0 (IBM Corp., Armonk, NY, USA), and data are reported with 95% confidence interval. RESULTS: According to BMI, patients who underwent monomaxillary surgery presented: underweight = 2.6%, normal weight = 51.3%, overweight = 35.9%, and obese = 10.3%. The subjects who underwent bimaxillary surgery presented: normal weight = 43.3%, overweight = 36.7%, and obese = 20%. BMI was similar between the groups at all time points (preoperative, p= 0.237; 10 days PO, p= 0.325; 40 days PO, p= 0.430; and 90 days PO, p= 0.609). All patients lost weight postoperatively, and WL was similar among the PO measurements (p= 0.163). CONCLUSIONS: Although both monomaxillary and bimaxillary orthognathic surgeries resulted in WL and lower BMI, there was no statistically significant difference in these metrics between the two types of surgery.

Plication of the Suprahyoid Muscles Concomitant with Genioplasty to Improve the Aesthetics of the Submandibular Region / Plicatura de los Músculos Suprahioideos Concomitante con Genioplastia para Mejorar la Estética de la Región Submandibular

In addition to functionally correcting skeletal facial deformities, orthognathic surgery also has a great impact on aesthetics and facial proportions. However, patients who have soft tissue changes, such as tissue flaccidity, may not achieve an ideal result, and require complementary surgical techniques that promote aesthetic refinement. The literature on less invasive techniques is limited, and therefore, this work aims to report a surgical technique performed concomitantly with genioplasty to refine the harmony of the submandibular region, in a simple and effective way. Patient with skeletal class II deformity, with lack of mandibular definition and submandibular flaccidity, underwent bimaxillary advancement orthognathic surgery with advancement genioplasty to correct chin retrusion. Due to limited results with bone repositioning alone, plication of the suprahyoid musculature was performed in association with the same approach used in the genioplasty. As a result, there was traction in the cervical region, with a consequent decrease in the submental-cervical angle and improvement in submandibular aesthetics. Furthermore, there was no need for extensive surgical intervention and no impairment of the functional results of the orthognathic surgery itself. Therefore, it can be concluded that plication of the suprahyoid musculat ure concomitantly with genioplasty is a technique that promotes aesthetic gains in the cervical region.

Además de corregir funcionalmente las deformidades faciales esqueléticas, la cirugía ortognática también tiene un gran impacto en la estética y las proporciones faciales. Sin embargo, los pacientes que tienen cambios en los tejidos blandos, como la flacidez, pueden no lograr un resultado ideal y requieren técnicas quirúrgicas complementarias que promuevan el refinamiento estético. La literatura sobre técnicas menos invasivas es limitada, por lo que este trabajo tiene como objetivo reportar una técnica quirúrgica realizada concomitantemente con la genioplastia para refinar la armonía de la región submandibular, de manera simple y efectiva. Se trató a un paciente con deformidad esquelética clase II, con falta de definición mandibular y flacidez submandibular, intervenida de cirugía ortognática de avance bimaxilar con genioplastia de avance para corregir la retrusión del mentón. Debido a los resultados limitados solo con el reposicionamiento óseo, se realizó la plicatura de la musculatura suprahioidea en asociación con el mismo abordaje utilizado en la genioplastia. Como resultado, hubo tracción en la región cervical, con la consiguiente disminución del ángulo submentoniano-cervical y mejoría en la estética submandibular. Además, no hubo necesidad de una intervención quirúrgica extensa ni deterioro de los resultados funcionales de la cirugía ortognática en sí. Por lo tanto, se puede concluir que la plicatura de la musculatura suprahioidea concomitantemente con la genioplastia es una técnica que promueve ganancias estéticas en la región cervical.

Mechanical Evaluation of Different Stable Internal Fixation Techniques of Sagittal Osteotomy in Mandibular Advance / Evaluación Mecánica de Diferentes Técnicas de Fijación Interna Estable de Osteotomía Sagital en Avance Mandibular

The mandibular advancements performed in orthognathic surgeries can be stabilized with several techniques when using stable internal fixation. This study aims to comparatively evaluate, in vitro, the mechanical strength in a polyurethane mandibular model for four fixation techniques for sagittal split ramus osteotomy mandibular. 60 samples were divided into 4 groups, with 15 units for each group: group A, group B, group C and group D. Advances of 5 mm were made for each subgroup and fixed with 2.0 mm system plates and monocortical screws in the replicas of human hemimandibles in polyurethane resin. The samples were submitted to mechanical tests of linear loading, being evaluated the peak load and peak deformation. Technique B presented higher peak load (Kgf) and techniques A and B presented higher peak strain (p<0.05). Technique D presented lower peak load and lower peak strain (p<0.05). It is concluded that the study based on the development of new techniques for fixation for sagittal osteotomy of the mandibular ramus is of great importance for the advancement of orthognathic surgery, provided by the technical innovation of more favorable plate models.

Los avances mandibulares realizados en cirugías ortognáticas pueden estabilizarse con varias técnicas cuando se utiliza fijación interna estable. Este estudio tuvo como objetivo evaluar comparativamente, in vitro, la resistencia mecánica en un modelo mandibular de poliuretano para cuatro técnicas de fijación para la osteotomía sagital de la rama mandibular. Se dividieron 60 muestras en 4 grupos, con 15 unidades para cada grupo: grupo A, grupo B, grupo C y grupo D. Se realizaron avances de 5 mm para cada subgrupo y se fijaron con placas de sistema de 2,0 mm y tornillos monocorticales en las réplicas de hemimandíbulas humanas en resina de poliuretano. Las muestras fueron sometidas a pruebas mecánicas de carga lineal, siendo evaluadas la carga máxima y la deformación máxima. La técnica B presentó mayor pico de carga (Kgf) y las técnicas A y B presentaron mayor pico de deformación (p<0,05). La técnica D presentó menor carga máxima y menor tensión máxima (p<0,05). Se concluye que el estudio basado en el desarrollo de nuevas técnicas de fijación para la osteotomía sagital de la rama mandibular es de gran importancia para el avance de la cirugía ortognática, proporcionada por la innovación técnica de modelos de placas más favorables.

Tratamiento ortodóncico-quirúrgico de pacientes con asimetría facial / Orthodontic-surgical treatment of patients with facial asymmetry

Introducción: la asimetría facial es una condición notoria en el tercio inferior de la facie del sujeto y entre los tercios medio y superior, en este último será menos evidente esta condición, de tal manera que podría considerarse como una de las molestias de mayor incidencia en pacientes con necesidades o no de terapia or- todóncica. Objetivo: evaluar mediante una revisión de la literatura los tratamientos ortodóncico-quirúrgicos de pacientes con asimetría facial. Material y métodos: la literatura se seleccionó mediante una búsqueda en las bases de datos electrónicas: PubMed, Scopus, Web of Science. Las palabras clave utilizadas fueron: facial asymmetry, asymmetry, surgical treatment, surgical orthodontic treatment. La búsqueda se restringió a artículos en inglés publicados del año 2011 al 2021. Resultados: después de aplicar los criterios de inclusión y exclusión en total se obtuvieron y revisaron 27 artículos. Se realizó la revisión de literatura del tratamiento ortodóncico-quirúrgico en pacientes con asimetría facial. Conclusión: es preciso el abordaje ortodóntico quirúrgico para la corrección de la asimetría facial, del protocolo dependerá la situación clínica y la elección de tratamiento ortodóntico quirúrgico, lo que brindará mejoras significativas en la simetría facial (AU)

Introduction: facial asymmetry, is a notorious condition in the lower third of the subject's facie and between the middle and upper thirds, in the latter this condition will be less evident; in such a way, it could be considered as one of the discomforts of greater incidence in patients with needs or not of orthodontic therapy. Objective: to evaluate by means of a literature review the orthodontic-surgical treatment of patients with facial asymmetry. Material and methods: the literature was selected through a search in the following electronic databases: PubMed, Scopus, Web of Science. The keywords used were: facial asymmetry, asymmetry, surgical treatment, surgical orthodontic treatment. The search was restricted to articles in English published from 2011 to 2021. Results: after applying the inclusion and exclusion criteria, a total of 27 articles were obtained and reviewed. The literature review of orthodontic-surgical treatment in patients with facial asymmetry was performed. Conclusion: surgical orthodontic approach is necessary for the correction of facial asymmetry, the protocol will depend on the clinical situation, the choice of surgical orthodontic treatment, which will give significant improvements in facial symmetry (AU)

Tratamiento integral de la clase III esquelética severa, mordida abierta y asimetría facial / Comprehensive treatment of severe skeletal class III, open bite and facial asymmetry

Introducción: La cirugía ortognática está especialmente indicada en casos complejos, donde los procedimientos conservadores fracasan o son insuficientes. El diagnóstico, planificación y tratamiento deben estar a cargo de un equipo multidisciplinario que trabaje en estrecha relación. Objetivo: Reportar el trabajo multidisciplinario en el tratamiento ortodóncico quirúrgico de una desarmonía dentomaxilofacial compleja. Presentación de caso: Paciente masculino, 19 años de edad, mestizo, clase III esquelética grave, hiperdivergente con mordida abierta y asimetría del tercio inferior, que recibió tratamiento prequirúrgico descompensador de ortodoncia. Se realizó cirugía ortognática bimaxilar con genioplastia de ascenso. Conclusiones: El tratamiento de las desarmonías dentomaxilofaciales es complejo y necesita la concurrencia de varias especialidades. Para la resolución del presente caso fue necesario el trabajo coordinado y simultáneo de especialistas de ortodoncia, prótesis dental, cirugía maxilofacial, periodoncia, psicología y otorrinolaringología. Se alcanzaron resultados estéticos y funcionales acorde a los objetivos del tratamiento propuestos y hubo estabilidad un año después de la cirugía(AU)

Introduction: Orthognathic surgery is especially indicated in complex cases, where conservative procedures fail or are insufficient. Diagnosis, planning and treatment should be carried out by a multidisciplinary team that works closely together. Objective: Report the multidisciplinary work in the surgical orthodontic treatment of a complex dentomaxillofacial disharmony. Case presentation: Male patient, 19 years old, mestizo, severe skeletal class III, hyperdivergent with open bite and asymmetry of the lower third, who received presurgical treatment decompensating orthodontics. Bimaxillary orthognathic surgery was performed with ascent genioplasty. Conclusions: The treatment of dentomaxillofacial disharmonies is complex and requires the concurrence of several specialties. For the resolution of this case, the coordinated and simultaneous work of specialists in orthodontics, dental prostheses, maxillofacial surgery, periodontics, psychology and otolaryngology was necessary. Aesthetic and functional results were achieved according to the proposed treatment objectives and there was stability one year after surgery(AU)

Application of three-dimensional technology in orthognathic surgery: a narrative review.

With the recent advances in three-dimensional (3D) technology, orthognathic surgery has steadily evolved, gradually performing more sophisticated surgery and expanding its scope of application. The objective of this study is to summarize the current evidence of the application of 3D technology in the field of orthognathic surgery, with the hope of providing helpful information for practitioners who are interested in orthognathic surgery. Peer-reviewed articles published in English were retrieved from literature through an extensive search performed in PubMed/MEDLINE. The application of 3D technology in orthognathic surgery can be summarized from the aspects of preoperative diagnosis, surgical planning, surgical procedure and postoperative evaluation. There is evidence that supports the use of 3D technology, including cone beam computed tomography (CBCT), 3D imaging devices, 3D printing technology, navigation, computer-aided design and computer-aided manufacturing (CAD/CAM), can help improving orthognathic surgery and achieving promising outcomes. Even though there may be an added cost, the application of 3D technology has provided decreased operative time and hospital length of stay, which is positive for both practitioners and patients. With precision and minimal invasiveness, 3D technology is considered to be an effective method in exploring more scientific and reasonable programs and procedures of orthognathic surgery.

Tratamiento multidisciplinario del exceso vertical total y deficiencia transversal del maxilar sin mordida cruzada posterior / Multidisciplinary treatment of total vertical excess and transverse maxillary deficiency without posterior crossbite

Introducción: La corrección del exceso vertical del maxilar traerá no solo cambios verticales en el perfil, sino también sagitales y transversales. La ausencia clínica de mordida cruzada posterior puede enmascarar deficiencias del ancho y provocar planes de tratamiento incorrectos. Objetivo: Describir los aspectos más importantes en la atención de un caso con exceso vertical y deficiencia transversal del maxilar sin mordida cruzada posterior. Presentación de caso: Paciente femenina de 26 años de edad acude a consulta por "dientes hacia adelante". El examen físico y el estudio de los medios diagnósticos permitieron concluir la existencia de exceso vertical y deficiencia transversal del maxilar. Clínicamente no se observó mordida cruzada posterior. El tratamiento por etapas incluyó ortodoncia, expansión e impactación quirúrgica del maxilar. Conclusiones: El ascenso quirúrgico del maxilar debe planificarse a partir de un análisis holístico. Incluye los cambios sagitales del perfil y de la relación transversal entre las arcadas, provocados por el efecto de rotación mandibular. La ausencia de mordida cruzada posterior no excluye la existencia de deficiencia transversal del maxilar. Asimismo, la dimensión definitiva de la expansión debe establecerse una vez que la arcada inferior alcance sus dimensiones definitivas(AU)

Introduction: The correction of the vertical excess of the maxilla will bring not only vertical changes in the profile, but also sagittal and transverse ones. The clinical absence of posterior crossbite can mask width deficiencies and lead to incorrect treatment plans. Objective: Describe the most important aspects in the care of a case with vertical excess and transverse deficiency of the maxilla without posterior cross bite. Case presentation: A 26-year-old female patient comes to the consultation for "teeth forward". The physical examination and the study of the diagnostic means allowed to conclude the existence of vertical excess and transverse deficiency of the maxilla. Clinically, no posterior crossbite was observed. Staged treatment included orthodontics, expansion and surgical impaction of the maxilla. Conclusions: The surgical ascent of the maxilla should be planned based on a holistic analysis. It includes the sagittal changes of the profile and the transverse relationship between the arcades, caused by the effect of mandibular rotation. The absence of posterior crossbite does not exclude the existence of transverse maxillary deficiency. Likewise, the definitive dimension of the expansion must be established once the lower arcade reaches its definitive dimensions(AU)

Condylar repositioning according to digital bite registration method for virtual orthognathic surgery planning: A series of 49 consecutive patients.

INTRODUCTION: The accurate mandibular condylar positioning for orthognathic surgical planning is fundamental in obtaining a planned occlusal result. The differences between the position of condyles seen on computed tomography or cone-beam computed tomography (CBCT) scans and during surgery reduce the accuracy of the result. This study aimed to assess the differences between the condylar position recorded on CBCT and a numerical 3-dimensional (3D) model created after mandibular repositioning for orthognathic surgery planning. METHODS: This study retrospectively evaluated 49 patients who underwent virtual orthognathic surgery planning. The procedure involved recording a computed tomography or CBCT of the skull and dental surface using an intraoral digital scanner. The mandible was repositioned on the numerical 3D model according to the superimposed virtual bite registration in centric relation. Linear and angular measurements of the right and left condyles were recorded before and after mandibular repositioning. RESULTS: The positions of 98 condyles were compared. Linear measurements of the posterior and superior joint spaces revealed a significant difference. Subgroup analyses displayed statistically significant differences for patients with skeletal Class II malocclusion. CONCLUSION: According to the digital bite registration method, the difference between the mandibular position recorded on CBCT and on the numerical 3D model after repositioning may have clinical significance. Further studies are needed to validate this theory and test the accuracy of the clinical results.

Discrepancia negativa transversal del maxilar y factores asociados en pacientes con necesidad de cirugía ortognática / Negative transverse maxillary discrepancy and associated factors in patients requiring orthognathic surgery

Introducción: La discrepancia transversal de las arcadas es un problema esquelético poco estudiado en personas con necesidad de tratamiento ortodóncico quirúrgico. Objetivo: Caracterizar a pacientes con discrepancia negativa transversal del maxilar y necesidad de tratamiento por cirugía ortognática. Métodos: Se realizó un estudio descriptivo de corte transversal en 25 expedientes clínicos de pacientes que acudieron al servicio de cirugía maxilofacial del Hospital Clínico Quirúrgico Hermanos Ameijeiras, con discrepancia negativa transversal del maxilar y necesidad de cirugía ortognática entre enero de 2016 y enero de 2020. Se estudiaron los casos por medio de variables cualitativas divididas en epidemiológicas, características faciales y mediciones dentarias. Para el análisis se confeccionaron cuadros estadísticos y como medidas de resumen se utilizaron frecuencias absolutas y relativas. Resultados: La frecuencia de la discrepancia negativa del maxilar fue de 13,3 por ciento. Los pacientes de piel blanca fueron los más afectados (80 por ciento) y el principal motivo de consulta fue estético (68 por ciento). La asimetría del tercio inferior y el perfil cóncavo estuvieron presentes en el 44 por ciento y 36 por ciento de los casos respectivamente. Se observó alta frecuencia de pacientes con el tercio inferior aumentado (76 por ciento), mordida cruzada posterior (48 por ciento), mordida abierta anterior (75 por ciento), apiñamiento en la arcada inferior (63,3 por ciento) y lingualización del incisivo inferior (72 por ciento). Conclusiones: La discrepancia negativa transversal del maxilar es frecuente en personas con necesidad de cirugía ortognática y con gran afectación estética. Se observó mayor predisposición a padecerla en pacientes de piel blanca(AU)

Introduction: Transverse discrepancy of the arches is a skeletal problem not sufficiently studied in persons requiring surgical orthodontic treatment. Objective: Characterize patients with negative transverse maxillary discrepancy requiring surgical orthognathic surgery. Methods: A descriptive cross-sectional study was conducted of 25 medical records of patients attending the maxillofacial surgery service at Hermanos Ameijeiras Clinical Surgical Hospital with negative transverse maxillary discrepancy requiring orthognathic surgery from January 2016 to January 2020. The cases were studied with qualitative variables divided into epidemiological, facial features and dental measurements. Analysis was based on statistical charts. The summary measurements used were absolute and relative frequencies. Results: The frequency of negative maxillary discrepancy was 13.3 percent. White skin patients were more commonly affected (80 percent). The main concern was aesthetic (68 percent). Lower third asymmetry and a concave profile were present in 44 percent and 36 percent of the cases, respectively. A high frequency was observed of patients with an augmented lower third (76 percent), posterior crossbite (48 percent), anterior open bite (75 percent), lower arch crowding (63.3 percent) and lower incisor lingualization (72 percent). Conclusions: Negative transverse maxillary discrepancy is common among patients requiring orthognathic surgery for large aesthetic alterations. White skin patients were found to be more prone to present this disorder(AU)

Discrepancia negativa transversal del maxilar y diferencias cefalométricas laterales según el ancho de la arcada superior / Negative maxillary transverse discrepancy and cephalometric lateral differences according to the width of upper arch

Introduction: Negative maxillary transverse discrepancy is not exclusive to narrow upper arch. The transverse discrepancy due to maxillary deficiency is well described, but this is not the case when the maxilla displays adequate dimensions and the origin of the problem is an excess of mandibular width. Objective: To describe the cephalometric characteristics of negative maxillary transverse discrepancy present in narrow upper arches with those of normal or increased width. Methods: An observational and cross-sectional study was carried out in records of patients with negative maxillary transverse discrepancy. The cases referred to the maxillofacial surgery department at Hospital Clínico Quirúrgico "Hermanos Ameijeiras" between January 2016 and January 2020 were selected. The initial study models were measured and two groups were formed: those with a distance between central fossae of 16 to 26, less than 47 mm and the other with equal or greater values. Lateral cephalometric analysis of Ricketts, McNamara, Björk & Jarabak, Burstone and soft profile were performed on the initial teleradiographs. Using the Mann Whitney U test of independent samples, measurements with statistically significant differences between both groups were selected. (p <0.05). Results: Significant differences were found regarding the cranial-mandibular relationship, mandibular anatomy, maxillo-mandibular relationship and occlusal relationship. The most important differences observed in each group were respectively: S-Ar / Ar-Go ratio (p = 0.033), mandibular body length (p = 0.01), mandibular-maxillary difference (p = 0.003) and overjet (p = 0.043). Conclusions: In the studied patients, negative maxillary transverse discrepancy has the same probability of presenting a wide or in norm upper arch, as well as a narrow arch. In the first case, it is more likely to find jaws with increased body length, a skeletal class III pattern and a concave profile; in the second case, the tendency is to present small jaws with increased articular angle and dental overjet(AU)

Introducción: La discrepancia negativa transversal del maxilar no es exclusiva de una arcada superior angosta. La discrepancia transversal por deficiencia maxilar está bien descrita, pero no ocurre así cuando el maxilar se presenta con dimensiones adecuadas y el origen del problema es un exceso del ancho mandibular. Objetivo: Describir las diferencias cefalométricas de la discrepancia negativa transversal del maxilar que presentan arcadas superiores estrechas con aquellas de ancho normal o incrementado. Métodos: Se realizó un estudio observacional, de corte transversal, en expedientes de pacientes con discrepancia negativa transversal del maxilar. Se seleccionaron los casos que acudieron entre enero del 2016 y enero del 2020 a la consulta de cirugía maxilofacial del Hospital Clínico Quirúrgico "Hermanos Ameijeiras". Se midieron los modelos de estudio iniciales y se conformaron dos grupos: aquellos con distancia entre fosas centrales de 16-26, menor de 47 mm y el otro con valores iguales o superiores. Se realizaron análisis cefalométricos laterales en las telerradiografías iniciales de Ricketts, McNamara, Björk & Jarabak, Burstone y perfil blando. Por medio de la prueba U de Mann Whitney de muestras independientes, se seleccionaron las mediciones con diferencias estadísticas significativas entre ambos grupos (p < 0.05). Resultados: Se encontraron diferencias significativas concernientes a la relación cráneo mandibular, anatomía mandibular, relación máxilo mandibular y relación oclusal. Las diferencias observadas más importantes de cada grupo fueron respectivamente: relación S-Ar/Ar-Go (p = 0,033), longitud del cuerpo mandibular (p = 0,01), diferencia mandibular-maxilar (p = 0,003) y resalte (p = 0,043). Conclusiones: En los pacientes estudiados, las discrepancias negativas transversales tienen la misma probabilidad de presentarse con la arcada superior ancha o en norma, que angosta. En los primeros es más probable encontrar mandíbulas con longitud del cuerpo incrementada, patrón de clase III esquelética y perfil cóncavo; en los segundos, la tendencia es a presentar mandíbulas pequeñas con ángulo articular y resalte dentario aumentados(AU)

Development of novel artificial intelligence systems to predict facial morphology after orthognathic surgery and orthodontic treatment in Japanese patients.

From a socio-psychological standpoint, improving the morphology of the facial soft-tissues is regarded as an important therapeutic goal in modern orthodontic treatment. Currently, many of the algorithms used in commercially available software programs that are said to provide the function of performing profile prediction are based on the false assumption that the amount of movement of hard-tissue and soft-tissue has a proportional relationship. The specification of the proportionality constant value depends on the operator, and there is little evidence to support the validity of the prediction result. Thus, the present study attempted to develop artificial intelligence (AI) systems that predict the three-dimensional (3-D) facial morphology after orthognathic surgery and orthodontic treatment based on the results of previous treatment. This was a retrospective study in a secondary adult care setting. A total of 137 patients who underwent orthognathic surgery (n = 72) and orthodontic treatment with four premolar extraction (n = 65) were enrolled. Lateral cephalograms and 3-D facial images were obtained before and after treatment. We have developed two AI systems to predict facial morphology after orthognathic surgery (System S) and orthodontic treatment (System E) using landmark-based geometric morphometric methods together with deep learning methods; where cephalometric changes during treatment and the coordinate values of the faces before treatment were employed as predictive variables. Eleven-fold cross-validation showed that the average system errors were 0.94 mm and 0.69 mm for systems S and E, respectively. The total success rates, when success was defined by a system error of < 1 mm, were 54% and 98% for systems S and E, respectively. The total success rates when success was defined by a system error of < 2 mm were both 100%. AI systems to predict facial morphology after treatment were therefore confirmed to be clinically acceptable.

A cirurgia ortognática no tratamento da DTM em pacientes classe II / The orthognatic surgery in treatment of TMJ in class II patients

Introdução: A má oclusão Classe II pode influenciar negativamente na qualidade de vida dos pacientes, tanto na aparência facial, quanto função oral ou até ambas. Atualmente, o tratamento ortodôntico-cirúrgico é comumente utilizado em pacientes com discrepâncias esqueléticas graves. Objetivo: Este estudo tem como objetivo analisar os resultados da cirurgia ortognática associada ao tratamento ortodôntico nos pacientes que possuem DTM e má oclusão de Classe II por retrognatismo mandibular. Metodologia: Foi realizada uma pesquisa bibliográfica nas plataformas de buscas científicas Google Acadêmico, CAPES/MEC, PubMed/Medline, Scielo, Elsevier, e nas revistas AJO-DO (American Journal of Orthodontics and Dentofacial Orthopedics) e The Angle Orthodontist (An International Journal of Orthodontics and Dentofacial Orthopedics), utilizando as seguintes palavras chave: retrognatismo, cirurgia ortognática e transtornos da ATM. Conclusão: A maioria dos pacientes que apresentam sinais e sintomas de DTM pré-operatórios melhoram a disfunção e diminuem os níveis de dor com o tratamento ortognático. Além disso, o tratamento ortodôntico é de suma importância para se obter o sucesso do procedimento cirúrgico, assim como na estabilidade pós-cirúrgica.(AU)

Introduction: Class II malocclusion can negatively influence patients in quality of life, in the facial and oral appearance or both. Currently, orthodontic-surgical treatment is commonly used in patients with severe skeletal discrepancies. Objective: The objective of this study was to analyze the results of orthognathic surgery associated with orthodontic treatment in patients who have TMD and Class II malocclusion due to mandibular retrognathism. Methodology: A bibliographic search was performed in the scientific search platforms Google Scholar, CAPES/MEC, PubMed/Medline, Scielo, Elsevier, AJO-DO (American Journal of Orthodontics and Dentofacial Orthopedics) and in The Angle Orthodontist (An International Journal of Orthodontics and Dentofacial Orthopedics), using the keywords: retrognathism, orthognathic surgery and TMJ disorders. Conclusion: With orthognathic treatment, most patients who had preoperative DTM signs and symptoms showed an improvement and a decrease in pain levels. In addition, orthodontic treatment is important for the success of the surgical procedure, as well as for post-surgical stability.(AU)

Effect of continuous infusion of dexmedetomidine on blood loss in orthognathic surgery: a retrospective study.

BACKGROUND: Patients with maxillofacial deformities require orthognathic surgeries to correct occlusion. The surgical procedure may lead to massive bleeding, which is associated with haematoma, respiratory obstruction, and asphyxia. Dexmedetomidine has been used in controlled hypotension and may reduce blood loss in orthognathic surgery. We conducted a retrospective cohort study to evaluate the effect of dexmedetomidine on blood loss in orthognathic surgeries. METHODS: The primary outcome examined was blood loss, and secondary outcomes were postoperative haemoglobin level; intraoperative heart rate and blood pressure (T1: at incision; T2: 30 min after incision; T3: 60 min after incision; T4: 120 min after incision); dosage of fentanyl, remifentanil, urapidil, and esmolol; operation time; and incidence of allogeneic blood transfusion. RESULTS: A total of 1247 patients were included in this study, and 540 patient pairs were matched via propensity score matching. There were significant decreases in mean blood loss, heart rate at T1-T4, blood pressure at T1, and remifentanil and esmolol dosage in the dexmedetomidine group compared with those in the control group. There was also a significant increase in the postoperative haemoglobin level of the dexmedetomidine group. CONCLUSIONS: Continuous infusion of dexmedetomidine can decrease blood loss in orthognathic surgery. TRIAL REGISTRATION: ChiCTR1800018794 (retrospectively registered) Name of registry: Chinese Clinical Trial Registry Date of registration: 2018/10/09 URL: www.chictr.org.cn/showproj.aspx?proj=30612.

Evolución hacia la era digital de la cirugía ortognática: experiencia en un centro universitario / Evolution towards the digital era of orthognatic surgery: experience in a university center

Resumen Introducción: La incorporación de tecnologías en la práctica quirúrgica, ha cambiado la forma de enfrentar el proceso quirúrgico. Objetivo: Describir la experiencia de los últimos 9 años, en cirugía ortognática, con la incorporación de la cefalometría 3D. Materiales y Método: Se realizó una revisión retrospectiva de pacientes operados de cirugía ortognática durante el período enero de 2011 a agosto de 2018. Se registraron datos demográficos, quirúrgicos, tipo de planificación quirúrgica, complicaciones y resultados a largo plazo. Resultados: 21 pacientes requirieron cirugías ortognáticas. Se realizaron 16 cirugías bimaxilares (76%), 3 cirugías de avance maxilar superior (14%) y 2 cirugías de osteotomía sagital de rama (10%). Las principales etiologías fueron: 67% maloclusión clase III (n = 14), 28% maloclusión clase II (n = 6) y 5% desviación mandibular (n = 1). La planificación prequirúrgica virtual fue utilizada en 11 pacientes (52%). La tasa de complicaciones Clavien-Dindo > III fue 4,8% (n = 1). Conclusiones: En nuestra experiencia, las técnicas de cirugía ortognática son seguras. Las complicaciones de la serie fueron escasas y bien toleradas por los pacientes. Durante los últimos años y, de acuerdo a los avances tecnológicos, la incorporación de la planificación quirúrgica virtual 3D favoreció el desarrollo de la cirugía ortognática en nuestro centro.

Introduction: Technological advances have been incorporated into cranio-maxillo-facial surgery changing the clinical practice of surgeons. Aim: The aim of this article is to describe our experience in orthognatic surgery in the last 9-years, with the incorporation of 3D cephalometry. Materials and Method: A retrospective chart review was performed from January 2011 to August 2018 on patients undergoing Orthognatic Surgery. Demographic and surgical data, type of surgical planning, complications and long-term results were recorded. Results: A total of 21 patients underwent orthognatic surgery. Average age was 28 years (DE 8.1), 11 men (52.3%) and 10 women (47.61%). The principal surgeries performed were: 16 (76%) bimaxillary, 3 maxillary advancement surgery 3 (14%) and bilateral sagital split osteotomy 2 (10%). Ethiologies were: 14 patients (this 67%) with malocclusion class III, 6 patients (28%) with malocussion class II, and 1 patient (5%) with mandibular deviation. Virtual 3D presurgical planning was used in 11 patients (52%). The total of complications Clavien-Dindo > III was 4.8% (n = 1). None patient required reoperation. Satisfaction rate with the procedure was high. Conclusions: Based on our experience, orthognatic surgery techniques are safe. The complication rate was lower and well tolerated by patients. The introduction of virtual planning provided a better scenario to develop maxillo-facial surgery.

Simplified orthognathic surgical treatment using non-surgical asymmetric maxillary expansion: A case report.

BACKGROUND: Transverse problems can be exacerbated by highly compensated occlusion in patients with skeletal asymmetry, which makes pre-surgical decompensation harder to achieve. OBJECTIVE: This case report describes a case of combined orthognathic surgery with facial asymmetry. We used pre-orthodontic surgical simulation to visualize the goal for presurgical orthodontics, planning for a one-jaw surgical treatment option. METHODS: The planned asymmetric expansion was performed using a maxillary skeletal expander (MSE II) with surgical corticopuncture over only the left side before MSE activation. Surgery was performed to achieve mandibular left outward yaw rotation to correct the patient's facial asymmetry after the planned amount of expansion was reached. RESULTS: The results showed substantial improvement of facial aesthetics as well as skeletal symmetry. Cooperation and communication between surgeon and orthodontist ensured that the final results were satisfactory.

Prevention of Nasal Ala Pressure Injuries With Use of Hydroactive Dressings in Patients With Nasotracheal Intubation of Orthognathic Surgery: A Randomized Controlled Trial.

PURPOSE: To compare a hydroactive dressing to an adhesive tape standard of care in the prevention of nasal ala pressure injuries associated with nasotracheal intubation during orthognathic surgery. DESIGN: Randomized controlled trial. SUBJECTS AND SETTING: The study took place in a tertiary hospital of stomatology in China. Patients undergoing general anesthesia with nasotracheal intubation during orthognathic surgical procedures were invited to participate. METHODS: Participants were divided into 2 groups: in the experimental group, a hydroactive dressing was applied to the nasal ala before the surgical procedures; the control group received standard prevention with a type of tape. Skin assessments were performed on the wards up to 72 hours after the procedures. Demographic information and potential contributing factors associated the development of nasal ala pressure injuries were collected from patients' electronic medical records. Pressure injury development was staged using National Pressure Injury Advisory staging guidelines. Pressure injury incidence was compared between groups using the χ test and odds ratio. RESULTS: The sample comprised 450 participants, 225 in each group. The incidence of nasal ala pressure injuries development was 14.222% and 4.444% in the 2 groups, respectively (P = .000). The odds ratio was 3.565 (95% confidence interval, 1.707-7.443). CONCLUSIONS: The study findings indicate that the incidence of pressure injuries of nasal ala skin protected by hydroactive dressings was lower than the standard preventive method. Hydroactive dressings should be considered as a prevention method to reduce device-related skin injuries associated with nasotracheal intubation.

Depression, temporomandibular disorders, and genetic polymorphisms in IL6 impact on oral health-related quality of life in patients requiring orthognathic surgery.

PURPOSE: To assess oral health-related quality of life (OHRQoL) in patients requiring orthognathic surgery, and evaluate if depression, temporomandibular disorders (TMD), and genetic polymorphisms in interleukin-6 (IL6) influence their OHRQoL. METHODS: A total of 132 individuals included in three different groups. Two groups were composed by patients with dentofacial deformity (DFD) Class II (n = 44) or Class III (n = 44) malocclusions, requiring orthognathic surgery. The control group (n = 44) included individuals without DFD. Patients from all groups were evaluated in preoperative appointments to assessOHRQoL, TMD, and genetic polymorphisms in IL6. OHRQoL was assessed using the 14-item Oral Health Impact Profile (OHIP-14). TMD and depression were assessed using Research Diagnostic Criteria for Temporomandibular Disorders protocol. The genetic polymorphisms rs1800795 and rs1800796 in IL6 were assessed through genomic DNA using real-time polymerase chain reaction. RESULTS: OHIP-14 scores were increased in patients with depression, myofascial pain, and inflammatory temporomandibular joint alterations in the right side, regardless of sex and DFD group. Individual homozygous CC in rs1800795 had increased values in domains "social disability" and "handicap" of the OHIP-14 compared with those who were homozygous GG. Individual heterozygous CG in the rs1800796 demonstrated increased values in domain "psychological discomfort" compared with those homozygous for CC and GG. CONCLUSION: In individuals requiring orthognathic surgery, depression, TMD, and genetic polymorphisms in IL6 contribute to negative impact on OHRQoL. These physical and emotional conditions, together with biological pathways, should receive more attention in treatment plans, in order to improve the patients' quality of life.

Severity and long-term complications of surgical site infections after orthognathic surgery: a retrospective study.

Surgical site infections (SSI) occur in 1.4% to 33.4% of cases after orthognathic surgery. This type of complication is a major concern to surgical teams, but there is no consensus for the prevention and treatment of SSI in orthognathic surgery. The purpose of this descriptive study was to evaluate the severity and the consequences of postoperative infections. The charts of all the patients operated on by the orthognathic surgery team between January 2015 and July 2017 were collected. All types of orthognathic procedures (Le Fort I maxillary osteotomy, bilateral sagittal split mandibular osteotomy, and genioplasty) were screened, and patients diagnosed with SSI were included. Demographic data, timing and severity of the infection, as well as long-term complications were recorded. Five hundred and twelve patients were screened. Forty-one patients (8%) presenting with SSI were included. There were 18 men and 23 women. The site of the infection was mandibular for 38 patients (92.7%) and maxillary for 3 patients (7.3%). The average time between surgery and infection was 31.5 days. Twenty-four patients received isolated oral antibiotics for inflammatory cellulitic reaction (58.8%), 15 patients had a localized collection treated by incision and drainage under local anesthesia (36.6%), and 2 patients had an extensive collection requiring surgical drainage under general anesthesia (4.9%). Five patients (12.2%) needed hardware removal for plate loosening, and 2 patients (4.9%) developed chronic osteomyelitis. Infection following orthognathic surgery is easily treated most of the time with no long-term complications. In cases of patients with potential risk factors for severe infection, antibiotics may be given with curative intents.

Balancing the dental occlusion and facial aesthetic features in cleft orthognathic surgery: Patient-centered concept for computer-aided planning.

Patients with cleft lip and palate could develop dentofacial deformity characterized by malocclusion, midface retrusion, midline discrepancy and asymmetry. Cleft orthognathic surgery has evolved from the simple maxillary LeFort I advancement with correction of dental malocclusion to the current model of patient-centered approach focusing on skeletofacial reconstruction using computer-assisted diagnosis and planning. Three-dimensional imaging and surgical simulation have provided valuable information for facial aesthetics and surgical feasibility. Surgery-first approach and two-jaw orthognathic surgery have gradually become prevalent replacing the conventional method. A better dentofacial outcome is achieved with reduction of the burden of care.